The model WB-200 operates on 12 or 24 Volt AC/DC (not included) and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.

Features:

• No false alarms due to condensation or humidity
• Can monitor up to 6 sensor probes - up to 100 feet away
• Provides (1) form "C" contact closure output for alarm
• Easy surface mount installation
• One year limited warranty

Specifications:

• Console Size: 5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm)
• Probe Size (standard): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)
• Probe Size (under carpet): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm)
• Power Requirements (resting state): 12V or 24V AC or DC
• Power Requirements (alarm condition): 5mA @ 12V or 24V AC, or 13.5mA @ 12V or 24V DC
• Operating Temperature: Control and Probe 32°F to +140°F (0°C to +60°C)
• Outputs: Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching)
• Recomended Dist. Between Probes & Console:
  • 1-2 probes: 200ft (61 m) max.
  • 3 or more probes: 100ft (30.5 m) per probe
• Recommended Max. Probes Per Console: 6